Impact tool Pin punches with pilots in accordance with DIN 6450
Pin punch, locking pins
PINPNCH-TAP
Art.-no.
071463 45
EAN 4011231720212
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
For locking pins
Chromium-vanadium air hardening steel
Tempered safety hammer heads
Prevents hammer head from developing bulges or splintering
Fully hardened shaft
Particularly tough and wear-resistant as a result
Pilots on shaft of pin punch
Used to perfectly centre tool on clamping sleeves.
Product information
Datasheets(X)
 | |
Length (L) | 180 mm |
Blade length (L2) | 95 mm |
Width of tip (d) | 6 mm |
Striking-surface diameter (S) | 10 mm |
Length of tenon | 5 mm |
Diameter of tenon | 3 mm |