Cutting and drilling oil CUT+COOL

Drilling/cutting oil CUT+COOL
CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

Prices for customers after login

Cutting and drilling oil CUT+COOL

Art.-no. 0893050004

Prices for customers after login

Quantity

PU

: currently piece / pieces available

Show availability in Würth branch offices

Exclusively for trade customers

Register now and access more than 15,000 products

Multi cutting oil for light to medium machining work

Universal application



Cools even when sprayed


  • Protects tools

  • Welding of small workshop parts to the cutting edge is prevented


Good penetration


Penetrates the smallest tolerances



Excellent corrosion protection


  • Provides sustained protection against further rusting and corrosion

  • No after-treatment or preservation measures required


Free from silicone, chlorine, resin and acids

Notice

Free from substances that wet paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1

Datasheets(X)

Safety data sheet

Application area

For drilling, thread cutting, thread moulding, lathing, countersinking, rubbing and sawing. Ideally suited for stainless steel, but also for high-alloy steels, constructional steels, non-ferrous and precious metals. Can also be used as a preservative agent on semi-finished/finished parts and machine parts, and can be used as gun oil.

Contents

400 ml

Container

Aerosol can

Colour

Light brown

Smell/fragrance

Perfumed

Chemical basis

Mineral oil

Shelf life from production

18 Month

Density

0.889 g/cm³

Acid-free

Yes

Chlorine-free

Yes

Min. flashing point

190 °C

Silicone-free

Yes

Resin-free

Yes

Chloric

No

Kinematic oil basis viscosity

12 mm²/s

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 6
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.