Cutting and drilling oil CUT+COOL Perfect

Drilling/cutting oil CUT+COOL Perfect
CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

Prices for customers after login

Cutting and drilling oil CUT+COOL Perfect

Art.-no. 0893050008

Prices for customers after login

Quantity

PU

: currently piece / pieces available

Show availability in Würth branch offices

Exclusively for trade customers

Register now and access more than 15,000 products

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Safe and efficient to use


  • Optimum results and safety for all materials and applications

  • Longer tool life

  • High corrosion protection

  • Can be welded without advance cleaning for low quantities


Can be used as minimum quantity lubricant


Optimum performance and best results thanks to specially coordinated components



Reliable performance, even on tools with incorrect settings

Notice

Free from chlorine, silicone, heavy metals and resin. Free from substances that impair wetting of paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3

Datasheets(X)

Safety data sheet

Application area

Optimum application for all machining applications on all materials such as steel, high-alloy steel, aluminium, non-ferrous metals, titanium, hard metal, cast metal etc.

Contents

400 ml

Container

Aerosol can

Colour

Yellow orange

Smell/fragrance

Oil

Chemical basis

Mineral oil with synthetic ester

Shelf life from production

24 Month

Density

0.835 g/cm³

Density conditions

at 20°C

Acid-free

Yes

Chlorine-free

Yes

Free from heavy metals

Yes

Min. flashing point

170 °C

Silicone-free

Yes

Resin-free

Yes

Kinematic oil basis viscosity

25 mm²/s

Paint-wetting impairment substances

Yes

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 5
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.