Drilling and cutting paste Cut and Cool Perfect

Drilling/cutting paste CUT+COOL
CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Prices for customers after login

Drilling and cutting paste Cut and Cool Perfect

Art.-no. 0893050010

Prices for customers after login

Quantity

PU

: currently piece / pieces available

Show availability in Würth branch offices

Exclusively for trade customers

Register now and access more than 15,000 products

Optimum results and safety for all materials and applications

Safe and efficient to use


  • Longer tool service life

  • High corrosion protection

  • Can be welded without advance cleaning for low quantities


Can be used as minimum quantity lubricant


Optimum performance, optimum results thanks to specifically matched components



Paste for the most challenging machining tasks


  • Machining of highest-strength steels fully possible

  • Horizontal and overhead applications entirely implementable

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3

Datasheets(X)

Safety data sheet

Application area

The drilling and cutting paste is particularly ideal for the most challenging machining processes, e.g. for highest-strength steels, tool steel, ball bearing steel, Cr-Ni alloys and Hastelloy.

Contents

500 ml

Colour

Brown

Chemical basis

Mineral oil with synthetic ester

Density/conditions

0.88 g/cm³ / at 20°C

Shelf life from production

36 Month

Silicone-free

Yes

Chlorine-free

Yes

AOX-free

Yes

Resin-free

Yes

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 6
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.