Machine setting tool
Mechanical setting tool for fixanchor
MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)
Art.-no.
0904908016
EAN 4049557418636
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
For quick and convenient hammering in of Würth fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a hammer drill
Standard SDS-plus drive arbor for ease of use
Suitable for all Würth hammer drills with SDS-plus drive arbor
- Particularly suitable for economical bulk installations
- Even, optimum load transfer — minimal insertion effort
- Conical mount perfectly adapted to fixing bolt anchor's connecting thread for neat, central anchor insertion
- Reduced setting times
- Also ideal for overhead installation and for hard-to-reach attachments (e.g. railings/hanging pipes)
- High-quality steel guarantees long service life
Create the drill hole
10
Knock in anchor with mason's mallet or machine setting tool
Set anchor in place
Apply torque
| Usable anchors | ||
| Product description | Designation | Dimensions |
| 02.5 | Fixing bolt anchor W-FAZ/S | M8 - M16 |
| 02.6 | Fixing bolt anchor W-FAZ/A4 | M8 - M16 |
| 11.1 | Fixing bolt anchor W-FA/S | M8 - M16 |
| 11.1 | Fixing bolt anchor W-FA/hot-dip galvanized | M8 - M16 |
| 11.2 | Fixing bolt anchor W-FA/A4 | M8 - M16 |
| HCR anchors available by special order | ||
Product information
Datasheets(X)
Application area
- Can be used for anchor sizes M8 to M16
- Mount setting tool on Würth hammer drill with SDS-plus drive arbor
- Place setting tool mount on fixing bolt anchor thread and mechanically insert anchor into pre-drilled and cleaned drill hole
- Fix anchor by applying specified torque with torque spanner (see anchor product information)
Suitable for anchor diameter | 8 mm, 10 mm, 12 mm, 16 mm |