Welcome to Würth UK For trade customers only

Colour silicone

Silicone sealant, colour
SILSEAL-(SILICON COLOR)-310ML

Art.-no. 08925800
EAN 4065746666008
Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 15,000 products

High-quality multifunctional sealant in individual RAL colours

Available in individual RAL colour tones


The choice of colours (approx. 180 RAL colours) offers unlimited design possibilities for indoor and outdoor expansion and connection joints.



Suitable for sanitary applications*



Large adhesive spectrum


Suitable for nearly all common building substrates.



  • No plasticisers, therefore compatible with natural stone

  • Permanently elastic

  • UV-resistant

  • Can be painted

  • Weather-resistant

  • Building material class B2 to DIN 4102
Proof of Performance

Tested in accordance with DIN EN 15651 Part 1/Part 3


  • Fire behaviour: Class E

  • Stability under load: ≤ 3 mm

  • Volume loss: ≤ 10%

  • Adhesion/expansion under pre-stress after being immersed in water: no performance requirement specified

  • Tensile behaviour for use in cold climatic zones at -30°C: ≤ 0.9 MPa

  • Tensile behaviour in cold climatic zones: no performance requirement specified

  • Durability: Passed

  • Microbiological growth: 2
Notice
  • Before attaching the nozzle, we recommend discarding approx. 2 cm of sealant as irregularities in terms of colour may occur in the tip of the cartridge. The nozzle tip must also be replaced when changing the cartridge.

  • All RAL colours can be ordered according to the RAL colour chart

  • All neon and metallic colours are excluded

  • Caution! Colour silicone is a special product tailored for customers. For production reasons, minor fluctuations in the colour may occur. This is not a product defect. It is not possible to exchange the products.

  • Carry out colour matching with existing material prior to application

  • Cannot be painted or plastered

  • Not suitable for use underwater or in aquariums

  • Does not adhere to PP, PE, PTFE or bitumen

  • Not suitable for bonding or filling cavities

  • Due to the large number of varnish and glazing formulations, always carry out your own tests on the area first, especially on alkyd resin paints and powder-coated aluminium

  • Yellowing on contact with white alkyd resin paints cannot be excluded

  • Not to be used in conjunction with pre-compressed sealing tapes
Application area
Color selection with the help of RAL-fan, item no. 0705 800 010
Neutral silicone
Perfect
Neutral silicone
A8 PRO
Neutral siliconeSilicone
Colour
Silicone acetate
for wet rooms
Silicone acetate
for food
Silicone
acetate
ApplicationsIndoors
1Window connection joints++++ ++
2Expansion joints indoors and outdoors++++*+++++
3Sanitary joints+ ++ (1) + (4)
4Repair of cracks
5Parquet joints++++
6In aquarium construction ++
7Kitchen area++ + ++
8Display cases + (3)
9Counter construction++ + ++
Outdoors
10Window and door joints++++ ++
Indoors and outdoors
11Window sealing++++
12Insulating glazing edge seal
13Natural stone joints ++
Important
technical
properties
Maximum continuous motion compensation25%25%25%25%25%25%12.5%
Skin formation time (23°C/50 rel. air humidity)approx. 10 min10–40 min5–8 min approx. 20 minapprox. 10 minapprox. 15 min
Full hardening mm/24 hoursapprox. 2approx. 2approx. 2 approx. 32-32-3
Temperature resistance-40°C to
+180°C
-40°C to
+150°C
-40°C to
+150°C
-40°C to
+120°C
-40°C to
+100°C
-40°C to
+180°C
-40°C to
+120°C
Application temperature+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
Can be smoothed with (W = water, DG = smoothing agent, T = dry)DGDGDGDGDG1DGDG
Special
features
DIN 18540 External Wall Joints in Building Construction
DIN 18545 Glazing in Window Construction++
Odourless/low odour++
Recoatability 2
Coating compatibility 2+++++++
Fungicidal properties++ (1)
Silicone-free
Can be sanded
Adhesion to wet surfaces
Bitumen compatibility
Resistant to UV, weathering and ageing+++++++
Suitable on tension-relieved polycarbonate glass (PMMA)+
Explanation of symbols: ++ = very good suitability+ = well suited1 = not the crystal-clear version2 = preliminary tests required3 = only crystal-clear version4 = not for swimming pools* = only indoors– = not suitable
Window and
façade sealing
Natural stone
sealant
4-in-1
Painter's
acrylic
Acrylic
sealant
Parquet
acrylic
SMP
Sealant
ApplicationsIndoors
1Window connection joints++ + ++
2Expansion joints indoors and outdoors++++ +
3Sanitary joints ++
4Repair of cracks ++++
5Parquet joints +++
6In aquarium construction
7Kitchen area +
9Display cases
10Counter construction +
Outdoors
11Window and door joints++ ++
Indoors and outdoors
12Window sealing ++
13Insulating glazing edge seal 2 ++
14Natural stone joints++++
Important technical
properties
Maximum continuous motion compensation25%25%20%5%10%25%
Skin formation time (23°C/50 rel. air humidity)approx. 30 minapprox. 10 minapprox. 10 minapprox. 10 minapprox. 10 min10–15 min
Full hardening mm/24 hoursapprox. 2.5approx. 2.51approx. 1approx. 1approx. 2
Temperature resistance-40°C to
+90°C
-40°C to
+220°C
-25°C to
+80°C
-20°C to
+80°C
-25°C to
+80°C
-40°C to
+90°C
Application temperature+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
+5°C to
+40°C
Can be smoothed with (W = water, DG = smoothing agent, T = dry)DGDGWWWDG
Special characteristics DIN 18540 External Wall Joints in Building Construction+
DIN 18545 Glazing in Window Construction
Odourless/low odour+++++
Recoatability 2+++++
Coating compatibility 2++++++
Fungicidal properties+
Silicone-free+++++
Can be sanded++
Adhesion to wet surfaces
Bitumen compatibility
Resistant to UV, weathering and ageing++++++
Suitable on tension-relieved polycarbonate glass (PMMA)
Explanation of symbols: ++ = very good suitability+ = well suited1 = not the crystal-clear version2 = preliminary tests required3 = only crystal-clear version4 = not for swimming pools* = only indoors– = not suitable

Tested in accordance with DIN EN 15651 Part 1/Part 3


  • Fire behaviour: Class E

  • Stability under load: ≤ 3 mm

  • Volume loss: ≤ 10%

  • Adhesion/expansion under pre-stress after being immersed in water: no performance requirement specified

  • Tensile behaviour for use in cold climatic zones at -30°C: ≤ 0.9 MPa

  • Tensile behaviour in cold climatic zones: no performance requirement specified

  • Durability: Passed

  • Microbiological growth: 2

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • For interior and exterior connection joints and joining natural stone e.g. granite and marble

  • Suitable for wet rooms
Instructions
  • The surface must be load-bearing, clean, dry and free from grease, rust and water

  • Do not use in heavy rain

  • Observe the joint dimensioning

  • Prime the joints with PE back-fill material

  • A primer, e.g. with Silicone primer, improves the adhesion for absorbent or porous surfaces

  • Smoothing agents must only be used before the skin formation time and must be completely levelled after use with a smoothing tool. Excess product next to the joint must also be removed immediately, otherwise staining may occur.

  • Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.

Chemical basis

Neutral crosslinked silicones, oxime-based

Smell/fragrance

Characteristic

Container

Cartridge

Contents

310 ml

Density

1.03 g/cm³

Continuous motion absorption

25 %

Shore A hardness

20

Min./max. skin-formation time /conditions

10-15 min min / at 23°C and 50% relative humidity

Full curing speed

2 mm/d

Fully hardening/curing conditions

23°C and 50% relative humidity

Min. breaking elongation

600 %

Breaking elongation conditions

for 2-mm film

Coating compatibility

Yes

Building material class

B2 - Normally inflammable

Building material class conditions

in accordance with DIN 4102

Min. temperature resistance

-40 °C

Max. temperature resistance

120 °C

Min. processing temperature

5 °C

Max. processing temperature

40 °C

Ultraviolet resistance

Yes

Recoatable/Can be painted over

No

Shelf life from production

9 Month

Conditions to maintain shelf life from production

cool and frost-free storage

Fungicidal properties

Yes

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU

MANCLKGGUN-CART-RED/BLACK-310ML

High-quality design, semi-open, made of sheet steel with plastic handle
x 1 pcs

MANCLKGGUN-CART-MET-310ML

Simple design, semi-open, made of sheet steel with riveted struts
x 1 pcs

MANCLKGGUN-CART-14:1-(UPTO-310ML)

Sturdy design, semi-open, made of sheet steel with feeding mechanism.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU

CARTGUN-PN-JUNIORFIX-310ML

MASTER
Powerful and lightweight pneumatic application gun for applying products in cartridges. Ideally suited for adhesives and sealants with high and low viscosities.
x 1 pcs
The gloss paint surface makes it easier to choose a colour
x 1 pcs
For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle
x 1 pcs

SEALCORDMATL-PE-6MM

Silicone-free and good joint filling strength
x 100 m

SEALCORDMATL-PE-10MM

Silicone-free and good joint filling strength
x 100 m

SEALCORDMATL-PE-15MM

Silicone-free and good joint filling strength
x 100 m

SEALCORDMATL-PE-20MM

Silicone-free and good joint filling strength
x 50 m

SEALCORDMATL-PE-PE-30MM

Silicone-free and good joint filling strength
x 25 m

SEALCORDMATL-PE-40MM

Silicone-free and good joint filling strength
x 50 m

SEALCORDMATL-PE-50MM

Silicone-free and good joint filling strength
x 50 m

JNTSMTHR-PLUS

Can be used for six different applications in all jointing scenarios
x 1 pcs

JNTSMTHR-UNI-SET1-RED-3PCS

Slim shape and high flexibility

JNTSMTHR-UNI-SET2-RED-3PCS

Slim shape and high flexibility

SMTHR-SEAL-AEROSOL-400ML

Universal smoothing agent suitable for all types of sealants

SMTHR-SEAL-5LTR

Universal smoothing agent suitable for all types of sealants
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information