Contact drilling screw, hexagon head with collar pias®
pias steel zp hex. hd metric w. under-head tooth.
SCR-DBIT-FLG-CNTCT-WS10-(A3K)-M6X16
ZEBRA PIAS
Art.-no.
021400616
EAN 4046778027524
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
Especially suitable for electrical installation
- Hexagon head with collar and metric thread, also with under-head serrations (points of contact)
- Galvanised steel, blue passivated (A3K)
Notice
- Zinc-plated drilling screws must only be used where dampness is not to be expected. For fasteners with a construction product approval, the approval, and in particular Part 2 "Special regulations", must always be observed!
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Product information
Datasheets(X)
CAD data (available after login)
 | |
Standards | WN 214 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Metric thread |
Shape of tip | Drilling tip |
Nominal diameter (d1) | 6 mm |
Length (l1) | 16 mm |
Flange diameter (dk) | 13 mm |
Head height (k1) | 6 mm |
Drill tip length (lp) | 6 mm |
External drive (s1) | WS10 |
Max. material thickness to be drilled through (metal) | 4.5 mm |
Min. recommended substructure thickness | 2 mm |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |