Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Customer login
Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Drilling and cutting foam CUT+COOL

Drilling/cutting foam CUT+COOL
CUTFM-DRL-(CUT-COOL)-400ML

Art.-no.: 0893050007

Prices for customers after login

Drilling and cutting foam CUT+COOL

Art.-no.: 0893050007

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 15,000 products

Highly active, high-performance cutting foam for all machining work.

Suitable for overhead work


Produces a highly-adherent oil foam on the workpiece



Requires no degreasing using cleaners


Wash off with clean water



Excellent cooling effect and strong adhesive force



Low consumption; can therefore be used as minimum quantity lubricant



Good performance thanks to high cutting speeds and low tool wear

Notice

Free from sulphur, mineral oil, heavy metals and resin as well as no volatile hydrocarbons. Free from substances that impair wetting of paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Wuerth Catalogue(X)

Catalogue page as PDF 1

Datasheets(X)

Safety data sheet 1

Application area

Ideally suited for all machining work such as thread cutting, thread drilling, centring, broaching, rubbing with reamers, drilling and milling.



Applications:


  • For all ferrous and non-ferrous metals

  • Steel: alloyed and unalloyed

  • All types of cast iron: Steel casting, malleable iron, high-pressure die casting etc.

  • Copper and copper alloys: Brass casting, red brass etc.

  • All chromium-nickel alloys

  • Aluminium and aluminium alloys

Contents

400 ml

Container

Aerosol can

Colour

Yellowish

Chemical basis

Glycol and polyglycol ether, additives

Shelf life from production

24 Month