Filling can type A Aerosol cans pre-filled with special propellant formulation
Filling can, type A
PNCAN-SNGLUSE-(TYP-A)-109ML
Register now and access more than 15,000 products
Apply water-based paint within five days of filling the can.
The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.
Datasheets(X)
For paint series Spies Hecker Permahyd series 280/285, Standox Standohyd Basecoat, Helios Mobihel Hydros For use in the aerosol can filling station
Remove the spray head and fill the can with mixed paint using the filling device provided.
For more information on usage, please refer to the technical data sheet.
Chemical basis | Diethyl ether |
Smell/fragrance | Characteristic |
Contents | 109 ml |
Container | Aerosol can |
Ignition temperature | 235 °C |
Vapour pressure | 340000 Pa |
Conditions for vapour pressure | at 20°C |