Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Customer login
Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Foodstuffs lubricating oil

Foodstuffs lubricating oil

Art.-no.: 08931071

Prices for customers after login

Foodstuffs lubricating oil

Art.-no.: 08931071

Prices for customers after login



Exclusively for trade customers

Register now and access more than 15,000 products

Colourless special lubricant with creeping properties for the food industry as well as for the beverage, pharmaceutical and clinical industries

Low-viscosity and colourless special lubricant with penetration properties

  • Outstanding lubrication properties in hard-to-reach places thanks to low viscosity

  • Excellent penetration and cleaning effect guarantees optimum protection on machinery and conveyors subjected to the influence of water

  • Economical

  • No visible damage if the lubricant occasionally comes into contact with the product

Odourless and tasteless

Good material compatibility

Broad application range on a variety of surfaces such as aluminium, stainless steel, plastics compatible with mineral oil, e.g. PP, PE, PS, nylon, polycarbonate glass, epoxy glass fabric-base plastics, sealing rings.

Displaces water

Optimum corrosion protection properties

Resin-free and acid-free


Silicone-free and AOX-free

Occasional contact with food is acceptable

Highly compatible with skin and mucous membranes


Proof of Performance
  • NSF H1-registered (no.: 126582), corresponds to H1 requirements

  • Approved by the LGA (Bavarian State Office of Commerce, Nuremberg, Germany)

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1


Safety data sheet 1

Application area

For liquid lubrication of valve gaskets, sleeves, O-rings, drives, piston rods and guides on slide dampers, hinge band and roller chains as well as mechanisms in the food and beverage industry. For lubricating cutting blades in the paper industry as well as needles and hooks on knitting machines. Versatile use in manufacturing, application and packaging of foodstuffs as well as of pharmaceutical and cosmetic products. Lubricating effect is even maintained for machines and conveyors exposed to water. Ideal for use as release agent in the food and beverage industries.


Clean and degrease the parts to be lubricated. Then spray a thin coat.

Chemical basis

Medical white according to DAB 10

Lubricant system







0.86 g/cm³

Density conditions

at 20°C

VOC concentration (CH)

22.3 g/l

Min. temperature conditions

-10 °C

Max. temperature conditions

180 °C

Min. flashing point

200 °C

Ignition temperature

510 °C

Kinematic oil basis viscosity

31 mm²/s

Conditions for viscosity of oil basis

at 20°C









Resistance against



300 ml


Aerosol can

Shelf life from production

24 Month

Suitable glove:

Nitrile chemical protective glove
Nitrile chemical protective glove
Permeation level: 6
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
≥ 10 min
≥ 30 min
≥ 60 min
≥ 120 min
≥ 240 min
≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.