Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Customer login
Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

HT brake protection

Brakes Protection Spray HT

Art.-no.: 0893816001

Prices for customers after login

HT brake protection

Art.-no.: 0893816001

Prices for customers after login


Exclusively for trade customers

Register now and access more than 15,000 products

Lubricating, separating and anti-corrosive paste extremely resistant to high temperatures and high pressures.


  • Does not harm sensors on brake systems

  • Suitable for ABS brake systems and ASR and ESP systems

Temperature-resistant up to 1400°C

Ceramic components for permanently high level of lubrication

Resistant to diluted acids, bases, spray water and salt water

Silicone-free and AOX-free

High pressure resistance

  • Do not apply to brake discs and brake friction lining

  • Shake the aerosol thoroughly

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1


Safety data sheet 1

Application area

Lubricating, separating and anti-corrosion paste for parts on vehicle brake systems, assembly aids on machines etc.

For the prevention of insertion damage and wear on bearings, sliding points and screw and plug connections.


200 ml

Weight of content

335 g


Light grey (bright grey)



Chemical basis

Mineral oil

Shelf life from production

12 Month


1.26 g/cm³







Suitable glove:

Nitrile chemical protective glove
Nitrile chemical protective glove
Permeation level: 6
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
≥ 10 min
≥ 30 min
≥ 60 min
≥ 120 min
≥ 240 min
≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.