Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Customer login
Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

MS Hightack structural adhesive

Structural adhesive MS High Tack
STRUCADH-MS-HTCK-WHITE-290ML

Art.-no.: 0893225105

Prices for customers after login

MS Hightack structural adhesive

Art.-no.: 0893225105

Prices for customers after login

Quantity

Exclusively for trade customers

Register now and access more than 15,000 products

Strong structural adhesive with high initial adhesion with MS-polymer basis.
  • Very high adhesive force

  • Can be used on numerous materials

  • Thanks to high initial adhesion, adhesion accessories are not normally required

  • Permanently elastic after hardening

  • Virtually odourless

  • Free of isocyanate

Product information

Wuerth Catalogue(X)

Datasheets(X)

Safety data sheet 1

Certificates/Documents(X)

Application area

For bonding panels, wooden laths, windowsills, mirrors and insulating materials in the construction industry. For bodywork construction and metal connections. Bonds in ship building.

Instructions

The application surface must be clean, dry and free from grease. For optimum results, the application of special cleaning agents and a primer is recommended. The product is not suitable for PP, PE, Teflon or bitumen. Preferably apply vertical beads 30 cm apart. To permit adequate ventilation and flexibility, the adhesive must be at least 3 mm thick between the elements being joined.

Contents

290 ml

Container

Cartridge

Colour

White

Chemical basis

MS polymer

Min. skin-formation time

13 min

Full curing speed/conditions

2,5 mm/d / 23°C and 55% relative humidity

Fully hardening/curing conditions

23°C and 55% relative humidity

Shore A hardness

60

Density/conditions

1,57 g/cm³ / at 23°C, 50% relative humidity

Min. tensile strength

1.5 N/mm²

Conditions for tensile strength

at 23°C, in accordance with ASTM D-638

Min./max. processing temperature

5 to 40 °C

Min./max. temperature resistance

-40 to 100 °C

Min. flashing point

100 °C

Ultraviolet resistance

Yes

Shelf life from production/conditions

18 Month / at 5°C to 25°C

Silicone-free

Yes