Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Customer login
Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Petrol performance improver

Performance enhancer petrol
ADD-PETR-ADD-PETROL-TREATMENT-300ML

Art.-no.: 5861101300

Prices for customers after login

Petrol performance improver

Art.-no.: 5861101300

Prices for customers after login

Quantity

Exclusively for trade customers

Register now and access more than 15,000 products

For all petrol engines with and without a catalytic converter.

Cleans the fuel system


Reduces fuel consumption thanks to exact fuel preparation



E10 suitability


  • Protects from water occurring in fuel tank due to the hygroscopic property of E10 fuel

  • Prevents corrosion

  • Cleans deposits in the fuel system


Optimal combustion


Reduces the formation of harmful exhaust gases

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Wuerth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3  |  4

Datasheets(X)

Safety data sheet 1

Application area

Removes lacquer-type deposits and resin build-ups in pipes, petrol pump, carburettor, valve tips and valves. Also removes oxidation residues.

Instructions

Empty the contents of the can into the fuel tank. The optimum amount is 150 ml for 35–40 litres. 300 ml are sufficient for 70–75 litres. The product is self-mixing. It does not do any harm if too much product is mixed.

Contents

300 ml

Colour

Colourless

Smell/fragrance

Solvent-like

Chemical basis

Hydrocarbon

Shelf life from production

24 Month

Density

0.799 g/cm³

Density conditions

at 20°C

Min. flashing point

-10 °C