Welcome to Würth UK For trade customers only

TRADE CUSTOMERS

CLICK & COLLECT

FAST DELIVERY

03300 555 444

40,000+ PRODUCTS

Quick action anchor W-DS/S With hooks - ANC-(W-DS/S)-(A2K)-6X75

Quick action anchor W-DS/S With hooks

Quick action anchor for ceilings W-DS/S
ANC-(W-DS/S)-(A2K)-6X75

Art.-no. 0905363001

EAN 4050641979339

All versions
Individual price display after login
Quick action anchor W-DS/S With hooks

Art.-no. 0905363001

Individual price display after login
Quantity
PU
x 100 pcs

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 15,000 products

Quick and easy to fit by hand. For suspension in concrete, zinc-coated steel, with hook
  • Quick and easy to fit

  • Easier and quicker to drill

  • Does not require specialist tool or setting tool

  • Easy to fit: Push the anchor in, pull it towards you – done

  • Anchors with friction locks – controlled expansion anchor
Proof of Performance

For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490


  • Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C

  • The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.

  • Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)

Create the drill hole

Clean the drill hole

INSERT W-DS/S.

Fully insert W-DS/S.

Pull down the W-DS/S with a jerky movement.

For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490


  • Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C

  • The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.

  • Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Suitable for fixing: light ceiling plates and ceilings, ceiling structures with wire hooks, wire suspenders, hanging brackets, strip lighting, light rails, lamps, cables, chains, etc.

  • The anchor can only be used indoors in dry and heated rooms.
Performance data
Anchor diameter [mm] 6
Plugs for use in concrete in non-load-bearing building structures.
(for all load directions) 		Fadm [kN] ≥ C20/25 and ≤ C50/601) 0,5
Würth system components (see 33.1 W-DN)
1) Part safety factors for resistances that are regulated in the approval, and a part safety factor for actions on γF = 1.4 have been taken into account. See European Technical Approval Guidelines (ETAG), annex C, for information about tension and cross loads, edge and centre distances.
Characteristic values
Minimum spacing smin [mm] 200
Minimum edge distance cmin [mm] 100
Minimum surface thickness hmin [mm] 80
Effective anchorage depth hef [mm] 33
drill diameter 2 d0 [mm] 6
Diameter of cutting edges2) dcut ≤ [mm] 6,4
Drill hole depth h1 ≥ [mm] 40
Würth system components (see 33.1 W-DN)
2) Hammer drill bits of tungsten carbide must comply with the specification in the information brochure from the Deutsches Institut für Bautechnik (The German Institute for structural engineering – DIBt) and Fachverband Werkzeugindustrie e.V. (The Federation of German Tool Manufacturers (FWI)I) concerning “characteristic values, requirements and tests for drill bits for masonry with tungsten carbide cutting edges that are used to produce drilled holes for anchorage”. Würth’s hammer drill bits meet these specifications.
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU

BLWOUTBULB-F.CLN

For cleaning drill holes with a smaller diameter
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details