Setting mandrel
AMO-Max setting mandrel
STGMNDRL-F.AMOMAX-3-12/16/18
Art.-no. 0911112003
EAN 4046778804194
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
Impact tool for mounting the Amo®-Max system
Proof of Performance
Test reports 031-02 and 05-141
Application area
Instructions
1. Pre-drill external thermal insulation composite system (without impact)
2. Drill centre drill hole into the substrate
3. Produce a drill hole suitable for the substrate and anchoring element
Insert the reset pin and then install the spacer
Drive in the spacer using the impact sleeve
Remove setting mandrel
1. Set fastening element (e.g. anchor rod) in place
2. Fit spacer and plastic sleeve
Fix and install attachment (in accordance with the installation instructions for the mounting element)
Test reports 031-02 and 05-141
Product information
Datasheets(X)
Suitable for drill hole diameter | 12 mm, 16 mm, 18 mm |