Sleeve cone
Intent cone
CNU-FORMWRK-PLA-(F.SPCEPIP)-ID14-ED42MM
Art.-no.
0519150022
EAN 4045989594740
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
For creating spacers (spreaders) with spacer tubes
- Removed after stripping
- Reusable multiple times
- Material: regranulated HDPE
Product information
Datasheets(X)
Instructions
Plugged into spacer tube. The spacer tube must be cut 2 cm shorter than the wall thickness. The sleeve cone is removed after stripping and can be reused. The spacer tube is then sealed with a plug.
Min. diameter | 22 mm |
Length | 10 mm |