Structural adhesive MS universal
Prices for customers after login
Register now and access more than 15,000 products
Accelerated initial adhesion
Very good adhesive range
High UV stability
Excellent weather resistance
Can be painted over "wet-in-wet"
Glued panels are spot weldable
Not suitable for PE, PP, PTFE, silicone rubber and softened plastics. For use in conjunction with non-ferrous base metals, the adhesive table must be observed. Make sure a minimum adhesive thickness of 3 mm is used to ensure secure bonding.
Unable to withstand the effects of water for long periods!
Floor joints, connection joints on metal, concrete, various plastics, bonding of vehicle bodies, bodywork construction, vehicle construction, railway carriage construction and container construction, metalworking, equipment and machine construction, electrical and plastics engineering, interior fittings, mirror bonds, as well as bonds on natural stone.
ABS, acrylic glass, anodised aluminium, aluminium, stainless steel, glass, GFRP, wood, copper, brass, natural stone, hard PVC, chipboard; bare, galvanised, primed and painted sheet steel; polystyrene, brick, zinc plate.
Full curing speed/conditions
4 mm/d / 20°C and 50% relative humidity
1.48 g/cm³ / at 23°C, 50% relative humidity
Conditions for resistance to tearing
in accordance with DIN 53504
Min./max. processing temperature
5 to 40 °C
Min./max. temperature resistance
-40 to 90 °C
Shelf life from production/conditions
12 Month / cool storage area
Short-term resistance against