Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Customer login

Do you want to be an online customer?

Register now in 3 simple steps to gain access to purchase over 15,000 products

Sales to trade customers only

Tyre mounting paste

Tyre fitting paste
LUB-TREFITT-PASTE-BLACK-5KG

Art.-no.: 08901241

Prices for customers after login

Tyre mounting paste

Art.-no.: 08901241

Prices for customers after login

Quantity

PU

x 1

Exclusively for trade customers

Register now and access more than 15,000 products

Product information

Wuerth Catalogue(X)

Catalogue page as PDF 1  |  2

Datasheets(X)

Safety data sheet 1

For mounting car, truck and motorcycle tyres

Good sliding properties


  • Requires less time and effort

  • Low material consumption

  • Low machine wear

  • Gentle on tyres and rim flange

  • Better centring of the tyre on the rim


Short flash-off time


  • Powerful bonding between tyres and rim is established only a short time after assembly

  • Reduces complaints and follow-on costs for any subsequent re-balancing


Rubber and rim care


  • Keeps the rubber soft, thereby ensuring permanent sealing between the rim and tyre bead

  • Prevents rust from forming (anti-corrosive)

  • Prevents the tyre from sticking to the rim


pH-neutral


  • No aggressive action on rubber or rim

  • Skin-friendly and environmentally-friendly


Suitable for run-flat tyres


Can be used for the latest tyre generations



Suitable for the tyre pressure monitoring system (TPMS)



Not harmful to health



Free from harmful solvents



Keeps the tyre bead soft and ready-to-use during summer/winter storage



Silicone-free

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Suitable for run-flat tyres


Can be used for the latest tyre generations

Instructions

Dismantling


  • Force off the tyre using a suitable release mechanism

  • Apply the tyre mounting paste to the rim flange and tyre bead with a paintbrush or sponge


Mounting


  • Before the new tyres are fitted, the rim should be cleaned of old mounting adhesive around the rim flange sealing area. We recommend using our brake cleaner to do this. Remove any rust with a wire brush. Doing so will really bring the benefits of Würth tyre mounting paste to the fore.


  • Then apply a thin coat to the tyre bead and rim flange and fit the tyres to the rim using the fitting machine and corresponding tools. Correct mounting of tyres is a pre-requisite for smooth running characteristics.

Contents

4716.98 ml

Weight of content

5 kg

Colour

Black

Viscosity/consistency

Pasty

Chemical basis

Hydrocarbonate

Shelf life from production

24 Month

Density

1.06 g/cm³

AOX-free

Yes

Density conditions

at 20°C

Min. processing temperature

-15 °C

Max. processing temperature

50 °C

pH value

5.7

Required accessory:

 
Product
Description
BRSH-WHLFITTPAST-L280MM
Art.-no.: 06930800

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 5
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.