W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M20
Art.-no. 4625000157
EAN 4056808647356
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
Manual tool for screwing in wire thread inserts
Product information
Datasheets(X)
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M20x2,5 |
Material | Steel |