Wiggle wire
Wiggle wire
WGLWRE-DRSW
Art.-no.
0691500147
EAN 4024835928977
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
For welding onto steel bodywork for 3x claws and Bi-Puller
Wiggle wire enables you to pull at multiple pulling points simultaneously
Typical peak stresses do not occur which prevents sheet metal from tearing and bumps from forming.
Notice
Total length 360 mm x 50 pcs. = 18 m. Wire thickness: 2 mm
Product information
Datasheets(X)
Instructions
Bend the wiggle wire slightly beforehand so that only a single curve comes into contact with the sheet metal during welding. It is advisable to weld every curve. Always weld towards the transformer earth, not the other way around.
 | |
Length | 360 mm |
Wire diameter | 2 mm |
Product weight (per item) | 12.700 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!