EPDM 0.8 mm butyl sealing tape for indoor use
SEALTPE-RAL-IN-EPDM/BUTYL-0,8X150MMX20M
Art.-no. 0875350158
EAN 4062856253494
Register now and access more than 15,000 products
Same performance as a 1.2 mm thick tape
- Meets the same requirements as a 1.2 mm thick tape.
- More economical through material savings.
- Same performance with less material required for manufacture and application.
- Simple, flexible processing, e.g. in corners.
Blocks water and vapour diffusion
- Prevents moisture penetration into the masonry from indoors.
- Reduces the risk of moisture-related structural damage.
Simple to install and very resilient
- Compensates particularly well for component movements.
- High resistance to UV and weathering for permanent, reliable seals.
- Also suitable for slightly uneven substrates when combined with EPDM sealing tape adhesive.
- Good compatibility with bitumen.
- EPDM indoor sealing tape should be used for indoor seals and EPDM outdoor sealing tape for outdoor seals due to the vapour pressure gradient.
- Please note the print on the tape.
- Tape cannot be plastered over.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
- For permanent, reliable sealing of joints indoors, e.g. for window sills, floor-level windows and balcony doors, for exterior door sills, conservatories and façades.
- For internal seals, e.g. for floor elements, thresholds of external doors if the seal comes into contact with screed.
- Substrates must be load-bearing, dry and free of dust and grease.
- We recommend cleaning the elements with a surface cleaner such as Activating Cleaner.
- To install, cut the sealing tape to the desired length, apply SMP EPDM sealing tape adhesive to the substrate and smooth out using a joint knife.
- Prepare a 1 mm thick bed of adhesive.
- Stick the EPDM tape to the substrate.
- Press lightly using a press-on roller.
- Ensure that the tape is not installed under tension.
- When using sealing tape with self-adhesive strips or when sealing components in contact with the ground, the tape must also be secured to the frame/element with a mechanical fixing according to DIN 18533.
Colour | Black |
Backing material | EPDM |
Adhesive base | Butyl |
Chemical basis | Polyisobutylene natural rubber |
Width | 150 mm |
Thickness | 0.8 mm |
Length of roll | 20 m |
Design | With self-adhesive strips |
Min./max. processing temperature | 35 to -5 °C |
Min./max. temperature resistance | -30 to 75 °C |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes |
Max. water-vapour diffusion resistance factor value µ | 270000 |
Elongation at break | 250 % |
Resistance against | Bitumen |
Shelf life from production/conditions | 12 Month / at 5°C to 30°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!