Welcome to Würth UK For trade customers only

Petrol lead substitute For engines with non-hardened valve seats

Lead substitute
LEAD-SUBSTITUTE-250ML

Art.-no. 5861102250
EAN 4065746667579

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 15,000 products

Protects against engine knocking, ringing and reignition

Organic sodium compounds


Forms a protective layer on valves and valve discs.



No heavy metal compounds


Can also be used in vehicles with retrofitted catalytic converter.



Organic sodium compounds form a protective layer on valve seats and valve discs


This helps to avoid deformation of the valves and valve misalignment.



Increases the service life of the valve seats, the outlet valves and the entire fuel system

Notice

The contents of one can are sufficient for 250 litres of fuel.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For engines with non-hardened valve seats (passenger cars, vintage cars, lawn mowers, boat engines, stationary engines). Petrol lead substitute is self-mixing and is added to fuel.

Contents

250 ml

Colour

Brown

Smell/fragrance

Characteristic

Chemical basis

Hydrocarbon

Shelf life from production

24 Month

Density

0.785 g/cm³

Density conditions

at 20°C

Min. flashing point

40 °C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information